M1CH43L — GOAL OS

FIELD DEPLOYMENT KIT — COMPLETE PORTABLE SETUP

Michael Bruer · GOAL Investment Inc. · June 2026

What This Bag Does

You walk into any business — office, warehouse, retail store, home. You set this bag down. You plug in one cable. You open the Mac. Within 90 seconds the machine has found every device in the building, identified what each one is, and is ready to wake them all simultaneously on your command.

This is not IT work. This is not networking. This is GOAL OS field deployment. One operator. One bag. Any building. Any device.

What Is In The Bag

📡
Travel Router
GL.iNet Beryl AX
🔌
5-Port Switch
TP-Link TL-SG105
🔋
Power Bank
Ugreen 165W 20000mAh
🔗
USB-C Hub
Anker 7-in-1 Ethernet
📶
USB WiFi Adapter
TP-Link Archer T3U
🧵
Flat Ethernet × 3
Cat6 1ft + 3ft + 6ft
💻
MacBook Air M4
Prototype Unit 1
📱
iPhone Hotspot
Backup internet
🎒
Sling Bag
All fits in one bag

Complete Hardware List

Travel Router — GL.iNet Beryl AX (GL-MT3000) WiFi 6 · Pocket size · Creates its own network OR bridges to client WiFi · WOL packet relay built in
Amazon / GL-iNet store
$99
★ THIS IS THE MOST IMPORTANT PIECE. This router is the reason you can walk into any building and immediately have your own network. You plug it into their ethernet wall port — or run it standalone on battery — and the Mac has a wired connection to every device in the building. Wake-on-LAN packets travel over wired ethernet. This is what makes it work.
5-Port Gigabit Switch — TP-Link TL-SG105 Plug and play · No configuration · Expands router to 4 wired ports · Fits in a pocket
Amazon / Best Buy
$15
Plug this into the router. Now you have 4 open ethernet ports. Plug the Mac in. Plug into a wall port. Done. Every device on their wired network is reachable.
Power Bank — Ugreen Nexode 165W 20,000mAh Charges Mac · Charges router · Charges switch · All at once · No wall outlet needed
Amazon / Ugreen store
$79
This is what makes the setup truly portable. You walk into a building, pull out the power bank, plug the router into it, plug the Mac into it. You do not need their power. You do not need to find an outlet. You are self-contained.
USB-C Hub — Anker 7-in-1 with Ethernet Port Connects Mac to router via ethernet · USB-A ports for ADB · HDMI out · SD card
Amazon / Anker store
$35
MacBook Air M4 has two USB-C ports. This hub turns one port into ethernet + USB-A + HDMI. One cable from the Mac → everything works.
USB WiFi Adapter — TP-Link Archer T3U Plus Second WiFi radio · Scan client network while Mac stays on your network · AC1300
Amazon
$25
Critical for scanning. Your Mac's built-in WiFi stays connected to your travel router. This second adapter connects to the client's WiFi simultaneously. You can see both networks at once.
Flat Cat6 Ethernet Cables (3-pack) 1ft + 3ft + 6ft · Flat profile · Pack flat in bag · No tangle
Amazon
$12
Flat cables pack in any bag and do not tangle. Three lengths covers every scenario.
Sling / Tech Bag — Tomtoc or Bagsmart Fits Mac + router + switch + cables + power bank · Organized pockets · Professional look
Amazon
$35
You walk in looking like a professional, not a hobbyist. Everything has a slot. You unpack in 60 seconds. You repack in 60 seconds.
TOTAL KIT COST
Everything except the Mac
$300

Exact Field Procedure — Step By Step

  1. Walk in. Find a wall ethernet port or ask for the WiFi password. Every office has ethernet in the walls. Hotels have it. Warehouses have it. If no ethernet — connect your travel router to their WiFi instead. Either way you are in.
  2. Plug the travel router into the wall ethernet port. Router powers on from the power bank. Takes 30 seconds to boot. It now bridges their network to yours.
  3. Plug the USB-C hub into the Mac. Plug ethernet from hub into the switch. Plug switch into router. One cable chain. Mac → Hub → Switch → Router → Their network. You are wired in.
  4. Open the Mac. Type: listen Machine comes alive. Speaks. Ready.
  5. Say: "scan the network" Machine runs nmap. Finds every device in the building. Prints them to screen with IP, MAC address, device type. Takes about 30 seconds.
  6. Register each device you want to control. goal-housecall --register "their-server" [MAC] [IP] windows_pc
    Do this for each PC, TV, smart device, printer, NAS.
  7. Say: "wake everything" Every registered device gets a wake packet simultaneously. Computers turn on. TVs light up. Screens come alive.
  8. Connect to internet if needed. Ask for WiFi password. Connect. Now Tesla, ntfy, and cloud features unlock.

What Works Before You Get The Password

✓ WORKS — NO PASSWORD NEEDED
Voice commander (listen)
AI brain (michael:latest — on chip)
Scan their local network
Wake-on-LAN (PC, Mac, server)
ADB Fire TV / Android wake
All terminal commands
Speech output (Zarvox)
Register and log devices
✗ NEEDS INTERNET
This chat (Base44)
ntfy push to phones
Tesla car commands
Charles Guardian monitoring
ngrok tunnel
Memory sync to server
THE STRATEGY: Walk in with zero internet. Scan. Wake everything. Let them watch their building come alive. THEN ask for the WiFi password. They give it to you because they already saw what you can do without it.

What You Say When You Walk In

"I don't need anything from you yet. Just let me set this down."

[30 seconds — router + cables — Mac open — type listen]

"I'm going to scan your network now. I want to show you what I can see."

[60 seconds — every device in the building appears on screen]

"That's your server. That's your front desk PC. That's your smart TV. That's your warehouse scanner. I can see all of it."

"Now watch."

[say: wake everything]

"Everything you own just turned on. From this bag. In under two minutes. That is GOAL OS."

Where To Buy — All Amazon

Search exactly these names on Amazon:
GL.iNet GL-MT3000 Beryl AX Travel Router — $99
TP-Link TL-SG105 5 Port Gigabit Switch — $15
Ugreen Nexode 165W 20000mAh Power Bank — $79
Anker 7-in-1 USB-C Hub with Ethernet — $35
TP-Link Archer T3U Plus USB WiFi Adapter — $25
Flat Cat6 Ethernet Cable 3-Pack — $12
Tomtoc Sling Bag for MacBook — $35

Total: ~$300 · Delivered in 2 days with Prime